|
|
Solutions
Aviation Industries
- Shot Peening of engine turbine blades, landing gears and spar structures etc.
- Cleaning of various components of aeroplane.
- Surface preparation – de-painting and re-painting, thermal spray of aeroplanes and its parts & thermal spray.
- Peening of landing gear parts and secondary Peening.
- Peening of hydraulic shafts and linkages.
- Peening of electrical parts and connections.
- Maintenance and cleaning of all external surfaces.
- Peening of welds and joints.
- Peening of jet engine components : blades, valves, spindles, shafts, intakes.
- Peening to form airfoils.
- General secondary Peening-air frame surfaces.
- All electrical, hydraulic, electronic and instrument parts for corrosion removal.
- Maintenance Peening-jet engine components for renewal.
- Peening wing stringers and structural parts.
- Peening door seals and frames.
- Spot cleaning of aluminum corrosion on exterior surfaces.
- Peening instrument shafts and parts.
- Peening electronic connectors.
- Cleaning after heat treatment-all types of HT aluminum and steel.
- Cleaning for preparation for coating on electrical or other surfaces.
|
|
|
Thermal Power Industries
- Shot Peening of turbine blades & rotors hubs for hydro power generators.
- Cleaning of various components of generating units de-burring machined components and its parts.
- Surface preparation before painting & thermal spray.
|
Hydro Power Project Industries
- Shot Peening of turbine blades & rotors hubs for hydro power generators.
- Cleaning of various components of generating units de-burring machined components and its parts.
- Surface preparation before painting & thermal spray.
|
Railway Industries
- Shot Peening of springs, piston cranks, heat treatment stress releving for welded diesel engine casing.
- Cleaning of various components of generating units de-burring machined components and its parts.
- Surface preparation before painting & thermal.
|
Automobile Industries
- Cleaning of carburetor, fuel pumps, water pumps, compressors,
- Cleaning of pistons, tie rods,
- Cleaning of electrical parts.
- Cleaning after HT-shafts, gear springs, axles, tie rods, carburetor parts.
|
Casting and Forgings Industries
- Deburring of castings.,
- Finishing of castings for decorations or glare free surfaces or general cleaning.
|
Textile Industries
|
Structural Industries
|
Cookware Industries
|
Tyre and Rubber Industries
- Cleaning of molds and dies for the manufacture of new and recapped tyres.
- Cleaning of molds and dies for other rubber products and those of plastic.
|
Bar and Tube Industries
|
Tools Industries
|
Offshore Industries
|
Wind Mill Industries
|
Marine / Ship Building and Repair Industries
- Cleaning of valves and instruments.
- Cleaning of electrical and electronic assemblies.
- Cleaning of outerwear
- Cleaning and Peening turbine blades and values.
- Sandblasting to remove scale and corrosion from deck and superstructure.
|
Electrical and Electronics Industries
- Cleaning of turbine rotors.
- Cleaning of connectors, valves, instruments and sensors.
- Cleaning of rotors and connectors after use. (Electrical Motors)
- Cleaning of housings prior to casting. (Electrical Motors)
- Cleaning of brushes. (Electrical Motors)
- Maintenance cleaning or controls. (Electrical Motors)
- Peening of shafts, rotors, connectors (re stress corrosion) (Electrical Motors)
|
Steel Industries
|
Glass Industries
- Cleaning of molds and dies.
- Frosting
- Monogramming and etching.
|
Medical and Surgical Industries
- Cleaning of molds.
- Finishing of surfaces which will be normally sterilized.
- Glare free finishing of surgical and hospital instruments.
- Deburring of hypodermic needs.
|
Pipe Industries
|
Mining Industries
- Maintenance cleaning of pumps, drills, pipes and instruments.
|
Jewelry
- Applying satin and other finishes
- Cleaning and restoring.
|
Stone / Marble Industries
- To blast clean the surface of FLOOR TILES, SLATES, SAND STONE, MARBLE CHIPS for proper bonding with surface.
- Creating DESIGN, SURFACE ETCHING & ENGRAVING on different types of stones.
|
Other Applications
- Clean embossing dies : rubber or plastic molds, steel stamps, engravings
- Hone cutting tool edges: high speed or tungsten carbide.
- Blend in discoloration: On brazing dissimilar metals together.
- Blend in grinder flaws: precision parts, drills, reamers, broaches taps.
- Roughen metal: Prepare and improve surface for bonding or rubber, Teflon, enamel, etc.
- Stress relieving: Peening.
- Investment castings: Blast ceramic or stone from cavities.
- Armatures: clean varnish from slots.
- Extrusion dies: Restore corrupted die in minimum time.
- Cleaning of scale and grime from water meters.
- Cleaning of electrical parts.
- To blast clean the surface of FLOOR TILES, SLATES, SAND STONE, MARBLE CHIPS for proper bonding with surface.
- Creating DESIGN, SURFACE ETCHING & ENGRAVING on different types of stones.
- Portability of machine helps it for cleaning huge monuments in a very less time.
- Tomb stone engraving, cleaning of dirt and grime of stone building.
- Site blasting of huge components like heavy structure, tanks, pressure vessels, bridges, towers, pipes etc. prior to repainting.
- DESCALING, DEBURRING & DEFLASHING of forged and diecast components.
- Quite useful for overhauling, general maintenance and repair work in cement, chemical & gas plants.
- Removal of heat treatment scale, corrosion, rusting, scale formation, welding flux, carbon & miliscale in steel components.
- STEEL FABRICATION can be de-scaled after welding or de-rusted, ready for painting on site using different media depending on finish required.
- Blast cleaning to remove scale, corrosion rust & paint from deck, hulls & super structure etc
- Widely used in Handicraft Industries to give new look to Metal as well as Wooden items.
|
|
|